advanceIP – Australia’s Largest Range of Premium IP Audio, IP Time & IP Door Entry Systems.
advanceIP – Australia’s Largest Range of Premium IP Audio, IP Time & IP Door Entry Systems.
Showing 1–36 of 57 results
2N 9134174 RFID Key Fob operates on 13.56 MHz frequency and is compatible with all 2N Axis access control readers and IP intercoms.
Technical Parameters
Frequency: 13,56 MHz
Standard: ISO / IEC 14443A
Reading distance: 2~10cm;
Material: ABS
Working temperature: -10°C to +50 °C
Size: 40 x 32 x 3,7mm
Colour: blue/white
Weight: 6g
The standalone IP Web Relay provides reliable remote control over any IP network using HTTP commands from any IP VoIP SIP Intercom. Web Relay can be located far away from the intercom in a secure location, thereby making it impossible for intruders to hack the door unit to gain entry. Web Relay unit can be controlled by authorized devices from an unlimited distance on the LAN or WAN and is available in multiple output configurations to allow control of multiple devices.
The WebRelay provides remote relay control in a huge number of applications including lighting control, heater, pump and motor control, security locking systems, remote reboot of many other devices. WebRelay’s flexible and very powerful design make the individuals imagination its only limit.
2N 9137921 MS Teams Integration Licence will allow you to connect 2N IP Intercoms with Microsoft Teams through the Microsoft SIP Gateway, allowing Teams users to handle intercom calls and open doors directly from their Teams app.
Requirements:
All-metal constructed backbox for flush-mounting into walls for 2N IP Force or IP Safety intercom models.
Brick Wall / Plasterboard Flush Mount Box options available, please select below.
Axis 2N 9151018 IP Force- Safety Screws are an alternative that is safer than regular screws. Torx with a pin. Supplied with the appropriate handle.
For use with Axis 2N IP Force and 2N Axis Safety Intercom units.
02338-001 Axis 2N IP Force Induction Loop transfers audio from the intercom to the person who is wearing a hearing aid. With this accessory, the intercom meets the requirements of the IEC 60118-4 standard, which you often must satisfy in public projects. The loop is inside the intercom, protecting it from rain and vandalism.
01976-001 Axis 2N IP Force Secure Door Pack provides the very highest level of security for your entrance doors. It is comprised of an add-on switch (also including a tamper switch) and a security relay. The individual components of the bundle can also be ordered separately. The additional switch allows you to control a second appliance, passive switching for an unlimited period, max. 30 V/1 A or active 12 V DC/max 700 mA.
01976-001 Axis 2N IP Force Secure Door Pack also includes a tamper switch to signalize if the front panel is opened. The security relay is a simple add-on device that prevents unauthorized manipulation with the lock. It is installed between the intercom from which it is powered and the lock which it controls.
The 2N Helios Uni Surface Mount Box (9153003) is an Aluminum back box for surface mounting the 2N IP Helios Uni, it supports both one button and two button models .
2N IP uni comes with flush mount box as standard, to order Surface mount box, please browse Accessories tab below.
2N IP uni comes with flush mount box , to order Surface mount box, Door Strike, etc. please browse Accessories and Complementary Products below.
2N IP uni comes with flush mount box as standard , to order Surface mount box please browse Accessories tab below.
2N 9155030 – Infopanel Module helps you place such information into the intercom installation as house number, opening hours and similar data. The Infopanel backlight is software controlled. Download datasheet.
2N® Helios IP Verso – Tamper switch enhances door entry security as it prevents tampering with the intercom and forced opening of the lock.The module secures your system against tampering by detecting intercom opening or top frame removing. The module is installed on a special place and needs no separate position.
Tamper switch comes along with I/O module.
2N 9155035 – 5 Button Module comes with 5 mechanical quick dial buttons. The buttons are backlit and can include name tags.
9155035 Module can be used in the 2N IP Verso Range of intercoms to extend the number of speed dial buttons and is ideally suited for Multi Dwellings and Office Complexes. It can be used either within the same Frame as the Main Unit, individually in its own Frame or with other Additional Function Modules in a multiple-Module Frame.
2N 9155036 – Touch Display Module for the 2N® IP Verso door intercom is a upmarket, four-inch LCD display that captivates with its intuitive controls and search function. In addition, it is resistant to water and mechanical damage to the utmost, and is very easy to read, not only in total darkness, but even in direct sunlight. Watch our video tutorial showing how to set up your own phone book, contacts and adjust various aspects of 2N® IP Verso Touch Display. Download datasheet.
The module helps you interconnect your system with other systems via the Wiegand interface. The module is installed under another module, i.e. needs no separate position.
02577-001 Axis 2N OSDP Module connects the 2N IP intercom reader to a third-party access control system. The communication between the 2N reader and the controller is via the OSDP protocol, which provides higher security than the Wiegand protocol and encrypts the transmitted data. The
OSDP module is designed primarily for Axis 2N® IP Verso and Axis 2N® IP Style intercoms but can also be used with Axis 2N Access Unit 2.0 smart readers.
For Axis 2N® IP Verso and Axis 2N® LTE Verso intercoms, install the OSDP module under another module (e.g. RFID card reader, Bluetooth reader, keypad). For Axis 2N® IP Style intercoms and Axis 2N Access Unit 2.0 readers, the OSDP module must be placed outside of the device.
 2N IP Verso Tamper Switch module detects any unauthorised opening of the intercom. By using this, you significantly improve the security of the whole installation. You connect the tamper switch directly to the security control panel. If any unauthorised tampering occurs, the switch triggers an alarm. For a more comprehensive setup in the Automation section, it is necessary to connect the tamper switch to an I/O module (9155034) or Wiegand module (9155037). You install the tamper switch in a special location in the main unit. It does not need a separate slot.
Axis 2N IP Verso Blind Panel Module 9155039 is a component part of the 2N IP Verso range and is used to fill any vacant module spaces in the 2N IP verso mounting frames.
Features:
2N 9155045 Fingerprint Reader Module module for 2N® IP Verso intercom provides maximum security, high reliability, and rapid fingerprint reading response. It works on indoor and outdoor installations under any weather conditions. Learn how to connect the fingerprint module to your 2N® IP Verso in our video tutorial. Download datasheet.
2N 9155071 – 2N IP Solo Surface mount wedge backplate is suitable only for the surface mount installation of the intercom (9155301CS/9155301CBS). The area touching the wall is 115 x 134 mm.
With 02078-001 Axis IP Verso Glass Mount, you can easily mount the 2N® IP Solo intercom on a glass surface. For complete installation of the intercom, you will also need a backplate (9155068), which you will apply to the glass mount. You then install the intercom on the mounting bracket. This installation is only suitable for the surface mount installation version of the Axis IP Solo intercoM
2N 91550946 – Touch Keypad & RFID Reader 125kHz, 13.56MHZ, NFC module combines an RFID reader with capacitive touch keypad for 2N® IP Verso and 2N® LTE Verso intercoms. This compact module uses multi-frequency RFID reader that allows a gradual employment of new smart 13.56MHz cards while continual use of the unsecure 125kHz ones for the necessary time. Touch keypad is used for access control to the building via PIN code as well as for calling to individual users. Download datasheet.
Increase the security of your doors to the maximum. A useful bundle containing a security relay, tamper switch and I/O module. Read what these accessories offer below.
The security relay is a simple accessory which prevents doors from being opened with a 12V battery. Such a battery allows burglars to open low-power locks if they reach the cables connecting the intercom/reader to the lock. Install the relay between the intercom/reader and the lock. Then pair the security relay with the 2N device. Once set up, the lock will only open if the relay identifies the specific signal sent from the intercom/reader.
The tamper switch is designed to detect intrusion into the intercom’s frame and will activate an alarm if it detects intrusion. What if you also want to prepare more complex scenarios which activate when an intercom is opened without authorization? The I/O module allows you, for example, to set the intercom to take photos and contact the appropriate security agency.
The above components may also be ordered individually – Security relay, Tamper switch and I/O module
The 2N 9156020 is an installation backplate used to surface mount the 9156111CB Helios IP Base to uneven surfaces.
The Helios IP Base mounting backplate contains 68mm/1~2 holes for mounting.
2N® Helios IP Base is a compact IP intercom with a simple and fast installation. It is fitted out with one or two buttons and brings high quality audio and video. The intercom is designed especially for smaller scale installations.
Please click on 2N IP base mounting backplate to order backplate if the unit needs to be mounted on glass or uneven surface. To order  Indoor Monitors, Door Strikes, etc. please browse Accessories and Complementary Products below.
2N 9157101- IP Style Touch Screen Intercom combines the best of IP intercoms and IP cameras in one unit. This exceptional door intercom with an amazing design and 10′′ display will perfectly complement the entrances to your premium projects.
No products in the cart.
